Ohm's law

Ohm's law :

Ohm's law states that the current through a conductor between two points is directly proportional to the potential difference or voltage across the two points, and inversely proportional to the resistance between them.

The mathematical equation that describes this relationship is:

where I is the current through the conductor in units of amperes, V is the potential difference measured across the conductor in units of volts, and R is the resistance of the conductor in units of ohms. More specifically, Ohm's law states that the R in this relation is constant, independent of the current.

The law was named after the German physicist Georg Ohm, who, in a treatise published in 1827, described measurements of applied voltage and current through simple electrical circuits containing various lengths of wire. He presented a slightly more complex equation than the one above to explain his experimental results. The above equation is the modern form of Ohm's law.

In physics, the term Ohm's law is also used to refer to various generalizations of the law originally formulated by Ohm. The simplest example of this is:

where J is the current density at a given location in a resistive material, E is the electric field at that location, and σ is a material dependent parameter called the conductivity. This reformulation of Ohm's law is due to Gustav Kirchhoff.

see : http://en.wikipedia.org/wiki/Ohm%27s_law

Water Turbines

Water Turbine

Water turbine is a device that convert the energy in a stream of fluid into mechanical energy by passing the stream through a system of fixed and moving fan like blades and causing the latter to rotate. A turbine looks like a large wheel with many small radiating blades around its rim.

Classification of Water turbines
According to the type of flow of water : The water turbines used as prime movers in hydro electric power stations are of four types.They are

• axial flow : having flow along shaft axis
• inward radial flow : having flow along the radius
• tangential or peripheral : having flow along tangential direction
• mixed flow : having radial inlet axial outlet

If the runner blades of axial flow turbines are fixed,those are called propeller turbines.

According to the action of water on moving blades water turbines are of 2 types namely impulse ad reaction type turbines.
Impulse Turbines :These turbines change the direction of flow of a high velocity fluid jet. The resulting impulse spins the turbine and leaves the fluid flow with diminished kinetic energy. There is no pressure change of the fluid in the turbine rotor blades. Before reaching the turbine the fluid's Pressure head is changed to velocity head by accelerating the fluid with a nozzle. Pelton wheels and de Laval turbines use this process exclusively. Impulse turbines do not require a pressure casement around the runner since the fluid jet is prepared by a nozzle prior to reaching turbine. Newton's second law describes the transfer of energy for impulse turbines.

Reaction Turbines : These turbines develop torque by reacting to the fluid's pressure or weight. The pressure of the fluid changes as it passes through the turbine rotor blades. A pressure casement is needed to contain the working fluid as it acts on the turbine stage(s) or the turbine must be fully immersed in the fluid flow (wind turbines). The casing contains and directs the working fluid and, for water turbines, maintains the suction imparted by the draft tube. Francis turbines and most steam turbines use this concept. For compressible working fluids, multiple turbine stages may be used to harness the expanding gas efficiently. Newton's third law describes the transfer of energy for reaction turbines.

According to the Head and quantity of water available the water turbines are of 2 types.Those are high head - low flow and low to medium head and high to medium discharge turbines.

According to the name of the originator water turbines are of 3 types namely Pelton Wheel,Francis tubine and Kaplan turbine.

Nuclear Power

Nuclear Power

Nuclear power is the controlled use of nuclear reactions to release energy for work including propulsion, heat, and the generation of electricity. Use of nuclear power to do significant useful work is currently limited to nuclear fission and radioactive decay. Nuclear energy is produced when a fissile material, such as uranium-235 (235U), is concentrated such that nuclear fission takes place in a controlled chain reaction and creates heat — which is used to boil water, produce steam, and drive a steam turbine. The turbine can be used for mechanical work and also to generate electricity. Nuclear power provides 7% of the world's energy and 15.7% of the world's electricity and is used to power most military submarines and aircraft carriers.

The United States produces the most nuclear energy, with nuclear power providing 20% of the electricity it consumes, while France produces the highest percentage of its electrical energy from nuclear reactors—80% as of 2006. In the European Union as a whole, nuclear energy provides 30% of the electricity.Nuclear energy policy differs between countries, and some countries such as Austria, Australia and Ireland have no nuclear power stations.

Concerns about nuclear power

The use of nuclear power is controversial because of the problem of storing radioactive waste for indefinite periods, the potential for possibly severe radioactive contamination by accident or sabotage, and the possibility that its use in some countries could lead to the proliferation of nuclear weapons. Proponents believe that these risks are small and can be further reduced by the technology in the new reactors. They further claim that the safety record is already good when compared to other fossil-fuel plants, that it releases much less radioactive waste than coal power, and that nuclear power is a sustainable energy source. Critics, including most major environmental groups, claim nuclear power is an uneconomic and potentially dangerous energy source with a limited fuel supply, especially compared to renewable energy, and dispute whether the costs and risks can be reduced through new technology.

There is concern in some countries over North Korea and Iran operating research reactors and fuel enrichment plants, since those countries refuse adequate IAEA oversight and are believed to be trying to develop nuclear weapons. North Korea admits that it is developing nuclear weapons, while the Iranian government vehemently denies the claims against Iran.

Several concerns about nuclear power have been expressed, and these include:

• Concerns about nuclear reactor accidents, such as the Chernobyl disaster
• Vulnerability of plants to attack or sabotage
• Use of nuclear waste as a weapon
• Health effects of nuclear power plants
• Nuclear proliferation

Nuclear Energy,Nuclear Fuels

Nuclear Energy

Nuclei are made up of protons and neutron, but the mass of a nucleus is always less than the sum of the individual masses of the protons and neutrons which constitute it. The difference is a measure of the nuclear binding energy which holds the nucleus together.

Nuclear energy is energy released from the atomic nucleus. Atoms are tiny particles that make up every object in the universe. There is enormous energy in the bonds that hold atoms together.This binding energy can be calculated from the Einstein relationship: mass-energy equivalence formula E = mc², in which E = energy, m = mass, and c = the speed of light in a vacuum (a physical constant).The alpha particle gives binding energy of 28.3 MeV

Nuclear energy is released by several processes:

• Radioactive decay, where a radioactive nucleus decays spontaneously into a lighter nucleus by emitting a particle;
• Endothermic nuclear reactions where two nuclei merge to produce two different nuclei. The following two processes are particular examples:
• Fusion, two atomic nuclei fuse together to form a heavier nucleus;
• Fission, the breaking of a heavy nucleus into two nearly equal parts.

Nuclear FuelsNuclear fuel is any material that can be consumed to derive nuclear energy, by analogy to chemical fuel that is burned to derive energy. By far the most common type of nuclear fuel is heavy fissile elements that can be made to undergo nuclear fission chain reactions in a nuclear fission reactor; nuclear fuel can refer to the material or to physical objects (for example fuel bundles composed of fuel rods) composed of the fuel material, perhaps mixed with structural, neutron moderating, or neutron reflecting materials.

Not all nuclear fuels are used in fission chain reactions. For example, 238Pu and some other elements are used to produce small amounts of nuclear power by radioactive decay in radiothermal generators, and other atomic batteries. Light isotopes such as 3H (tritium) are used as fuel for nuclear fusion. If one looks at binding energy of specific isotopes, there can be an energy gain from fusing most elements with a lower atomic number than iron, and fissioning isotopes with a higher atomic number than iron.

The most common fissile nuclear fuels are natural urnium,enriched uranium,plutonium and 233U.Natural uranium is the parent material.The materials 235U,233U and 239Pu are called fissionable materials.The only fissionable nuclear fuel occuring in nature is uraium of which 99.3% is 238U and 0.7% is 235U and 234U is only a trace.Out of these isotopes only 235U will fission in a chain reaction.The other two fissionable materials can be produced artificially from 238U and 232Th which occur in nature are called fertile materials.Out of the three fissionable materials 235U has some advantages over the other two due to its higher fission percentage.Fissionable materials 239Pu and 233U are formed in the nuclear reactors during fission process from 238U and 232Th respectively due to absorption of neutrons with out fission.Getting 239Pu process is called conversion and getting 233U is called breeding.